The Discount Multi-angle gloss meter includes a hollow box-shaped shell. The irradiation tubes are equipped with mutually matching detection elements. The bottom tube wall of the irradiation tube is a sliding bottom plate that slides and fits. The sliding roller at the bottom of the sliding bottom plate rolls and fits in the chute. The inner ends of the top tube walls of the two irradiation tubes are respectively hinged on both sides of the fixed table, the bottom end of the shaft is movably inserted on the top of the fixed table, the shaft is fitted with a lifting block, and both sides of the lifting block are hinged with booms. The outer end of the irradiation tube at the end of the boom, the top of the shaft passes through the top of the shell and the knob is fixedly installed; by setting the structure of pulling the end of the irradiation tube, the adjustment range of the irradiation angle of the irradiation tube is effectively expanded, and the inside of the detection port is always maintained. The light is shielded, the detection accuracy is high, the versatility is strong, and the structure is simple, easy to operate, and low cost.
The above is a brief introduction to the relevant little knowledge about Discount Multi-angle gloss meter.