头部邮箱+阿里巴巴
E-mail: sales@ksj.cn 
English
Enter search content
PRODUCT CENTER
Product Categories
Hot Products
MG6-FS Micro-gloss Meter
|
surgical indicator |
unit |
parameter value |
|
Reading range |
Gloss unit |
0.0～199.9 |
|
Indication error |
Gloss unit |
±1.5 |
|
Measuring light spot |
Mm2 |
1.5x3 |
|
Measurement window |
Mm2 |
2x4 |
|
Projection angle |
Deg. |
60 |
|
Body product (long & times; width & times; high) |
Mm3 |
123×38×65 |
|
Host weight |
Gram |
300 |
MG6-FS Micro-gloss Meter Application:
★ Measuring beam diameter 1.5mm, measuring window 4mmx2mm, suitable for gloss measurement of facet surface.
★ Gloss measurement on the surface of coating materials such as paints, lacquers, paints and inks.
★ Gloss measurement of the surface of building decoration materials such as stone, ceramic tile and profile.
★ Gloss measurement of paper, bamboo, plastic, film and other surfaces.
★ Gloss measurement of the surface of other materials.
Product Description:
★ Single section 5 (AA) alkaline batteries or rechargeable batteries are equally easy to use.
★ Low energy consumption: Single-cell alkaline battery can be continuously turned on for more than 58 hours.
★The whole set of instruments is designed in one piece, ready to use and easy to carry.
★Specially adjust the button cover for more peace of mind.
★The mouth is anti-scratch coating treatment to prevent scratching the object.
★ Small size, beautiful appearance, stable performance and convenient use!
Service Content:
★ Two years warranty, indefinite maintenance.
★ Free unlimited adjustment of instruments.
★ Provide technical support related to gloss measurement.
★ Customized special gloss measuring instruments.
Action Considerations:
★ The entire set of instruments should be kept clean during operation. Failure to do so may result in measurement errors and inaccurate verification.
★ If there is fog, dust or smudge on the surface of the work board, please wipe it off with lens paper or soft cloth and anhydrous ethanol.
★The instrument measuring port should be attached to the measured surface to avoid external light leakage. If necessary, black light cloth and other objects can be used to block the light around the measuring mouth. It is recommended to avoid glare environmental measurements.
★ Calibration and measurement or calibration operations should be performed at the same ambient temperature, otherwise too large ambient temperature differences will result in digital offsets.
★ If the MG6 series gloss meter is not used for a long time, it should be withdrawn from the battery to avoid corrosion and damage to the instrument.
★When the WGG60 series gloss meter is not used for a long time, it should replenish the battery pack in the machine every month.
-
MG6-FS specification.pdf
Size:2019-08-02 16:18:26
After eighteen-years’development, KSJ Glossmeters have been widely used all over the world in gloss measuring of paintwork, decorative materials, woodenwares, ceramic, printing ink, paper, as well as metal polishing and depositing. And becoming the first choice for experts in the above fields.
Online Message
Contact Us