头部邮箱+阿里巴巴
E-mail: sales@ksj.cn

Enter search content

PRODUCT CENTER
Product Categories
Hot Products
MG6-S1 single angle 60 degree coating gloss meter
Technical Specifications |
unit |
parameter value |
Measuring range |
Gloss unit |
0~199 |
Indication error |
Gloss unit |
±2 |
Graduation value |
Gloss unit |
1 |
Measurement window |
mm2 |
14x30 |
Projection angle |
Deg. |
60° |
Host volume (long & times; width & times; high) |
mm3 |
123×38×65 |
Host power |
|
1.2~1.5 AA( 5#) A rechargeable or alkaline battery |
Application:
★ Gloss measurement on the surface of coating materials such as paints, lacquers, paints and inks.
★ Gloss measurement of the surface of building decoration materials such as stone, ceramic tile and profile.
★ Gloss measurement of paper, bamboo, plastic, film and other surfaces.
★ Gloss measurement of the surface of other materials.
Product Description:
★ Streamlined design, the base is equipped with a calibration board, and it is easy to operate when it is turned on;
★Small and exquisite, with a sling, or a handshake, or a pocket;
★Use a 5# battery to continuously measure for more than 58 hours;
★ corrosion-resistant electrode anti-rust and anti-contact, withdraw from provincial maintenance when not in use;
★Adhering to the accurate measurement, stable measurement, small difference between the small table, quality control necessary;
★ old manufacturers, export domestic sales as the same warranty for two years, after-sales protection, warranty, repair, calibration are rest assured!
Service content:
★ Two years warranty, indefinite maintenance.
★ Free unlimited adjustment of instruments.
★ Provide technical support related to gloss measurement.
★ Customized special gloss measuring instruments.
Action Considerations:
★ The entire set of instruments should be kept clean during operation. Failure to do so may result in measurement errors and inaccurate verification.
★ If there is fog, dust or smudge on the surface of the work board, please wipe it off with lens paper or soft cloth and anhydrous ethanol.
★The instrument measuring port should be attached to the measured surface to avoid external light leakage. If necessary, black light cloth and other objects can be used to block the light around the measuring mouth. It is recommended to avoid glare environmental measurements.
★ Calibration and measurement or calibration operations should be performed at the same ambient temperature, otherwise too large ambient temperature differences will result in digital offsets.
★ If the MG6 series gloss meter is not used for a long time, it should be withdrawn from the battery to avoid corrosion and damage to the instrument.
★When the WGG60 series gloss meter is not used for a long time, it should replenish the battery pack in the machine every month.

After eighteen-years’development, KSJ Glossmeters have been widely used all over the world in gloss measuring of paintwork, decorative materials, woodenwares, ceramic, printing ink, paper, as well as metal polishing and depositing. And becoming the first choice for experts in the above fields.
Online Message
Contact Us