A customized Gloss meter is also called a gloss meter. It is an instrument used to measure the surface gloss of ceramics, paints, inks, plastics, marble, aluminum, and hardware. So do you know what its maintenance knowledge is? Let’s take a look at it with the editor below!
1. Avoid strong light during use.
2. The instrument is equipped with two standard boards. Keep it clean. It is not advisable to touch the surface with your fingers. If the surface is stained, the error of the instrument will increase and the reading will be inaccurate. If you touch it accidentally, you can wipe it with lens paper or absolute alcohol.
3. Due to the high stability of the instrument, the instrument does not need to be calibrated frequently. It is recommended to re-calibrate after 2 hours of continuous use.
4. This instrument is designed with a high battery usage rate. When the battery is used below 0.8V (the battery power is exhausted), the reading of the instrument begins to decline, and the red light-emitting diode in the upper right corner of the instrument displays a light, prompting the operator to replace the battery. Turn on the left side of the instrument. With the side battery compartment cover, the instrument can be reused. If the battery is exhausted, it should be replaced in time. Otherwise, if stored for a long time, the old battery may flow out of waste and cause damage to the instrument.
5. During the calibration process, if it is found that the calibration value of the black glass standard class cannot be reached by turning the calibration knob to the end, it may be that the optical lens of the instrument is seriously contaminated. Wipe the lens with a little absolute alcohol with lens paper to solve the problem. problem.
The above is the editor's introduction to the maintenance-related knowledge of the customized Gloss meter. I hope you can learn more.