Hot Products
Reinforcing glossmeter standard set plate
★Used for the verification of gloss working machine.
MG7-F4 intelligent single angle gloss meter
★Paper, cardboard; ★Applicable standard: TAPPI T480 om
MG4-F3 intelligent single angle ceramic special gloss meter
★Plastic materials, enamel materials, enamel materials;
★Gloss measurement of marble, granite, terrazzo and other stone surfaces.
WGG60 series host power supply for the built-in rechargeable lithium battery. The MG series host power supply is a AA (No. 5) rechargeable or alkaline battery. If the frequency of use is higher, use the WGG60 series. On the contrary, if the use frequency is low, use MG series, but please take out the battery after use to protect the instrument host.
Both MG6-FS and MG6-SA can measure the gloss of facets or surfaces with small curvature. MG6-FS main scope of application for non-metallic materials. MG6-SA mainly applies to metal materials. The measurement window of both is 2.0x 4.0mm, and the measurement spot is 1.5x 3.0mm.
Adjustment method: turn on the power supply, remove the dust cover, and place the measuring port on the adjustment black working plate. After half a minute, adjust the "adjustment" button to make the displayed value equal to the verification value of the black work board. Note that the measuring port of the gloss meter must be buckled into the positioning frame of the working plate to adjust the indication value. And the instrument must be adjusted every time it is turned on. The instrument can be used for more than 48 hours after being fully charged.
Strong light environment will affect the measurement of gloss meter. It is recommended to avoid strong light environment measurement. If you want to avoid external light leakage, you can use black flannel and other objects around the measuring opening to block the light.
Keshijia MG268-F2 model gloss meter with haze value calculation and percentage reflectance unit conversion function.
Keshijia glossmeter is designed and produced according to international standard ISO-2813 and national standard GB/T9754. The instrument also conforms to ASTM D523,ASTM D2457,ISO 7668, DIN67530, JIS Z 8741,BS3900,BS6161,GB/T13891,GB/T7706,GB/T8807.
Keshijia instrument warranty period of two years. If the instrument fails, please send the whole set of instrument together with warranty card to our company for repair.
Gloss meter, glossmeter, photometer, glossmeter, WGG glossmeter, MG glossmeter, multi-angle glossmeter and stone glossmeter are the main products of Quanzhou keshijia photoelectric instrument co., ltd.
Hotline:
Company E-mail:
Company Address:
264 Huangling, Huangling Village, zhangban town, Quanzhou Taiwanese Investment Zone
Copyright Quanzhou Keshijia Optoelectronic Instrument Co., Ltd. All rights reserved. Website Construction:China Enterprise Power Quanzhou SEO【Business License]]