
All Categories

Hot Products

Reinforcing glossmeter standard set plate
★Used for the verification of gloss working machine.
MG7-F4 intelligent single angle gloss meter
★Paper, cardboard; ★Applicable standard: TAPPI T480 om
MG4-F3 intelligent single angle ceramic special gloss meter
★Plastic materials, enamel materials, enamel materials;
★Gloss measurement of marble, granite, terrazzo and other stone surfaces.
Gloss meter for MG6-SS stone
★Gloss measurement of marble, granite, terrazzo and other stone surfaces.
Classification:
Stone
Regular
Small caliber
Normal Range
Product accessories:
Online Inquiry
Product Description
Technical indicators |
Unit |
Parameter Value |
Reading range |
gloss unit |
0~199 |
indication error |
gloss unit |
±2 |
Measuring spot |
mm2 |
10x20 |
Measurement window |
mm2 |
14x30 |
Projection angle |
You. You. |
60 |
Volume (length × width × height) |
mm3 |
123 × 38 × 65 |
Host weight |
grams |
300 |
Scope of application:
★Gloss measurement of marble, granite, terrazzo and other stone surfaces.
Product introduction:
★A single No. 5 (AA) alkaline or rechargeable battery works equally well.
★Low energy consumption: single section 5 alkaline battery can be switched on for more than 58 hours.
★The whole set of instruments is designed as a whole, which is easy to use and carry.
★Special adjustment button protective cover, operation more assured.
★Anti-scratch coating treatment of the test port to prevent scratches on the tested object.
★Small size, beautiful appearance, stable performance, easy to use!
Service content:
★Warranty for two years, indefinite maintenance.
★Free indefinitely adjust the instrument.
★Provide technical support related to gloss measurement
Operation Precautions:
★The complete set of instruments shall be kept clean during operation. Otherwise, it will cause measurement error and calibration inaccuracy.
★If there is fog, dust and dirt on the surface of the work board, please wipe it with lens paper or soft cloth dipped in absolute ethanol.
★The measuring port of the instrument shall be attached to the measured surface to avoid external light leakage. If necessary, black flannel cloth and other objects can be used around the measuring port to block the light. It is recommended to avoid strong light environment measurement.
★Calibration and measurement or verification operations should be carried out at the same ambient temperature, otherwise too large ambient temperature difference will bring digital offset.
★If the MG6 series gloss meter is not used for a long time, the battery should be withdrawn to avoid corrosion damage to the instrument.
★If the WGG60 series gloss meter is not used for a long time, the battery pack in the machine should be supplemented with appropriate amount of electric energy every month.
Previous Page
Previous Page
Get Quote