Picture Name
+
  • 5ban2.jpg
  • 5ban3.jpg
  • 5ban1.jpg

Standard set of ordinary gloss meter

★Used for the verification of gloss working machine.

Classification:

Gloss Standard

Gloss Standard Measurement

Product accessories:


Online Inquiry

Product Description

Scope of application:

★Used for the verification of gloss working machine.

Product introduction:

★GS-G for polished black glass plate material, GS-C for ceramic panel material

★Specification: 45mm x 85mm

★Annual variation ≤ ± 0.5 gloss unit

Note: the GS-G of the working surface, the interference aperture is not greater than 15 aperture, local aperture is not greater than 3.

Operation Precautions:

★The complete set of instruments shall be kept clean during operation. Otherwise, it will cause measurement error and calibration inaccuracy.

★If there is fog, dust and dirt on the surface of the work board, please wipe it with lens paper or soft cloth dipped in absolute ethanol.

★The measuring port of the instrument shall be attached to the measured surface to avoid external light leakage. If necessary, black flannel cloth and other objects can be used around the measuring port to block the light. It is recommended to avoid strong light environment measurement.

★Calibration and measurement or verification operations should be carried out at the same ambient temperature, otherwise too large ambient temperature difference will bring digital offset.

★If the MG6 series gloss meter is not used for a long time, the battery should be withdrawn to avoid corrosion damage to the instrument.

★If the WGG60 series gloss meter is not used for a long time, the battery pack in the machine should be supplemented with appropriate amount of electric energy every month.

Get Quote

Meant: Please leave your contact information and our professionals will contact you as soon as possible!

Submission