头部邮箱+阿里巴巴
E-mail: sales@ksj.cn
Enter search content
PRODUCT CENTER
Product Categories
Hot Products
MG7-F4 smart single angle sheen meter
Technical Specifications |
unit |
parameter value |
Measuring range |
Gloss unit |
Gs(75°): 0~150GU |
Indication error |
Gloss unit |
± 1.5 (0 to 119.9 GU), ± 1.5% (>120GU) |
Measuring light spot |
Mm2 |
Gs(75°): 9×16 |
Projection angle |
Deg. |
75° |
Host volume (long & times; width & times; high) |
mm3 |
155×48×75 (without base) |
Host power |
|
One AA (or LR6) alkaline dry battery or rechargeable battery |
Application range:
★ TAPPI T480 om;
★ film paper;
★ Gloss measurement of the surface of materials and products in many fields such as molding dies.
Product introduction:
★ Self-diagnosis from the school, intelligent design, attached software is very intimate;
★ Massive data storage, viewing, uploading and exporting are flexible and convenient;
★The menu of this machine is perfect, easy to operate and realize the function customization;
★ Streamlined design, multi-measurement angle, including haze and reflectivity for one-button measurement;
★The surface of the metal base is hardened and not deformed;
★ Use a 5# alkaline battery to complete 10,000 measurements in a row;
★Adhering to the traditional advantages of accurate measurement, stable measurement, small difference between desks and good mutual compatibility;
★ veteran manufacturers, export domestic sales for the same warranty for two years, after-sales protection, warranty, repair, calibration are rest assured!
Service content:
★ Two years warranty, indefinite maintenance.
★ Free adjustment of instruments indefinitely.
★ Provide technical support related to gloss measurement
Operational notes:
★ The entire set of instruments should be kept clean during operation. Failure to do so may result in measurement errors and inaccurate verification.
★ If there is fog, dust or smudge on the surface of the work board, please wipe it off with lens paper or soft cloth and anhydrous ethanol.
★The instrument measuring port should be attached to the measured surface to avoid external light leakage. If necessary, black light cloth and other objects can be used to block the light around the measuring mouth. It is recommended to avoid glare environmental measurements.
★ Calibration and measurement or calibration operations should be performed at the same ambient temperature, otherwise too large ambient temperature differences will result in digital offsets.
★ If the MG6 series gloss meter is not used for a long time, it should be withdrawn from the battery to avoid corrosion and damage to the instrument.
★When the WGG60 series gloss meter is not used for a long time, it should replenish the battery pack in the machine every month.
After eighteen-years’development, KSJ Glossmeters have been widely used all over the world in gloss measuring of paintwork, decorative materials, woodenwares, ceramic, printing ink, paper, as well as metal polishing and depositing. And becoming the first choice for experts in the above fields.
Online Message
Contact Us