Our newly purchased stone gloss meter cannot be used directly after the instrument is received, because some parameters need to be set by the user. Such samples were "wrongly" judged to be unqualified. So, what parameters need to be set for the newly purchased stone gloss meter?

1. Automatically save the measurement: whether the measurement data is automatically saved once every measurement. If the storage space in the instrument is not enough, it is not recommended to turn on automatic save, you can save it manually.

2. Screen backlight brightness: Just like our mobile phones, the higher the backlight brightness, the more power consumption. Therefore, we need to set the appropriate backlight brightness according to the use environment of the gloss meter.

3. Time setting: time, date, time display format, date display format: Everyone has different preferences for setting time and date, so we need to set them separately.

4. Screen backlight time: when the instrument is not in use, the screen of the instrument will automatically turn off the screen. When the frequency of our instrument is relatively high, the backlight time that can be set is moderate, because too short will affect the use, and too long battery life will not work.

5. System tolerance: We will no longer emphasize the importance of tolerance. Each angle tolerance of the stone gloss meter needs to be set separately, otherwise it will affect the pass or fail of the instrument's measured value of the sample. judge.