How much do you know about the use of Luminance meter on sales? Follow the editor to have a simple understanding!
1. It is necessary to read the operating instructions of the machine carefully before operation: be familiar with the functions and operating essentials of each part of the machine, be familiar with the functions and functions of the operation buttons, and be familiar with the correspondence between the machine indicator and the operation of the whole machine. Familiar with the parts and methods of daily maintenance.
2. The parameter settings of this machine are directly input on the control panel of the welding machine. Before the machine is running, please manually operate the manual operation buttons on the machine to confirm that the water, electricity and gas connections of the machine are normal! Confirm that all parts of the machine are in normal working condition! Improper operation may cause damage to the machine or personal injury! Before turning on the machine, please wear protective equipment as required by the regulations, and make sure that no flammable or explosive materials are stored around the machine. Make sure that all guards and covers of the machine are closed!

3. When welding larger workpieces or two people working together, you must first confirm that the workpieces are placed correctly and the cooperating personnel are also ready before starting the machine.
4. During the operation of the machine, all parts of the body cannot enter the welding area; do not touch the welding part of the workpiece just after welding with bare hands to avoid burns.
5. When the machine fails, please turn off the power immediately! Prevent the failure to expand.
In summary, it is a brief introduction to the relevant knowledge about the use of Luminance meter on sales.