Stone gloss meter manufacturers tell you that the gloss of stone is mainly divided into three types: actual polished gloss, polished gloss and theoretical gloss. There is a certain relationship between the three. In general, the theoretical gloss is greater than the polishable gloss of the stone, and the polishable gloss of the stone is greater than the actually polished gloss of the stone.

1. The constituent particles of stone. Stone gloss meter manufacturers tell you that the mineral composition of the stone will affect the gloss of the stone, mainly referring to the size of the crystal particles that make up the stone. The larger the size of the crystal particles, the poorer the resulting gloss and the poorer the polishability of the stone. On the contrary, the smaller the crystal particles, the more uniform they are. Then the polishability of the stone is better. There are also differences in the different measurement directions of the polished stone surface. So gloss is directional. The polishing surface of the stone with smaller particles has better consistency in different directions.
2. The hardness of the stone. Stone gloss meter manufacturers tell you that the gloss of the stone is also related to the hardness of the stone. The higher the hardness, the better the gloss of the stone under the same conditions. Because the higher the hardness of the stone, the slower the recrystallization and grinding of the stone. In actual operation, the slower the swing speed of the machine we master.
3. The density of the stone. Stone gloss meter manufacturers tell you that the density of the stone will affect the water absorption of the stone, the higher the density, the lower the water absorption, the lower the density, the greater the water absorption. Stones with a large water absorption rate are not conducive to the formation of the polishing layer. The density of the stone will directly affect its polishability of the stone. The higher the density of the stone, the better the crystal hardening effect, and the worse the crystal hardening effect, and the worse the polishability of the material.
The above information is the Stone gloss meter manufacturer's introduction and analysis of the influencing factors of stone gloss, hope it helps you.